Bathroom fitters in Horsham, West Sussex

Bath fitters in Horsham: a new bath fitted, sealed and panelled

A bath fitter removes a worn bath and sets a new one in its place, with the taps, waste, panel and sealant all done properly. Describe yours and the time you can talk, and a fitter from your area makes the call with a free quote ready.

Get a free bathroom quote

Four boxes and a time. No email address asked for.

By sending this form you agree to your details being shared with a local bathroom fitter so they can contact you. See our privacy notice.

  • Old baths out and new baths in
  • Taps, waste, panels and sealing included
  • Straight, acrylic, shaped or freestanding
  • Typical UK prices set out further down this page

The bath that is past saving

The enamel has worn through and gone rough. A crack runs from the plughole to the taps. The panel will not stay on, and there is a damp smell under the tub.

A bath that shifts when you lean on it is probably leaking at the edges. Water in the wrong place ruins the floor and the ceiling below.

You do not always need a whole new bathroom. Sometimes one new bath is the answer, and a fitter can tell you after a quick look.

Pair of chrome pillar taps on the rim of a white bath, with wall tiles removed to show copper pipework and a spanner and pipe cutters beside them

How to get your bathroom priced

  1. Describe the room and the job

    Add your name, number and part of town, then explain the job in plain words. A line on the size of the room and a bath or shower choice will do.

  2. Pick when the phone should ring

    Select the slot that suits you. A bathroom fitter who works in your part of Horsham phones at that time, checks the details with you and normally offers to visit and see the room.

  3. Weigh up the quote at your own pace

    The fitter names a price for the work. Ask for it in writing, hold it up against another if you wish, and agree only when you are happy. There is no fee for asking.

What fitting a bath involves

It sounds simple, yet it has several steps that must be done in the right order. A fitter will normally do the following.

  1. Switch off the water, drain the old pipes and disconnect the taps and waste
  2. Break out and remove the old bath, which is often heavy and awkward on stairs
  3. Check the floor and walls where the bath sat, and put right any damage
  4. Set the new bath on its frame or feet at the correct height and fall
  5. Connect the taps and waste, and run water to check for leaks
  6. Fit the panel, seal the gap against the wall and tidy up

A bath must sit level, with its rim true to the wall. If it does not, the sealant fails and water gets behind the tiles.

Choosing a bath that suits the room

Baths come in several shapes and materials. The right one depends on the space and on how you will use it.

Straight baths

The usual shape in a small room, with a length that fits along one wall. Check that the new one is the same length as the old, or the tiles and panel will not meet.

Shaped and corner baths

These suit larger rooms. They can waste floor space in a small one, so measure carefully first.

Freestanding baths

They look striking but need floor strength and room on every side. Some are very heavy once filled with water, so a fitter should check the floor.

What the guides say about bath prices

Select an item to see its range and the page it came from.

Price this job for your own room

Four boxes and a time. No email address asked for.

By sending this form you agree to your details being shared with a local bathroom fitter so they can contact you. See our privacy notice.

All fifteen guide prices together

JobUK guide price
Taking out an old bathroomRemoving the old bathroom before a refit, depending on the scale of the work.£600 to £1,000
Replacing a bath with a shower: Keep the bath and add a shower and screenThe cheapest option in the guide, with a shower and screen added to the existing bath.£500 to £1,000
Replacing a bath with a shower: Take the bath out and fit a shower enclosureThe most popular option in the guide, including taking the bath out, fitting the shower and the tiling or wall finish.£1,300 to £2,000
Installing a standard bathThe cost of fitting a standard bath. The bath itself is extra.£100 to £275

These are averages and ranges printed in published UK cost guides, and none is an offer to do the work at that price. Room size, your choice of fittings and whatever lies behind the old tiles all decide the real bill.

Taps, panels and sealing

Taps, panels and the sealant around the bath are small items that cause plenty of trouble when they are poor. Ask whether the quote covers each of them. Sealant is a short job but one that must be done at the end, after the bath has been filled once so that it has settled into its final position.

Bathroom work in Horsham

Parts of Horsham and the places nearby

Work is arranged across the town, its estates and the villages near it.

  • Town centre and the Carfax
  • East Side, Iron Bridge and New Town
  • Holbrook
  • North Heath
  • Roffey
  • Littlehaven
  • The Needles estate
  • Tower Hill
  • Broadbridge Heath
  • Southwater
  • Warnham
  • Faygate
  • Mannings Heath
  • Billingshurst and Slinfold

See every place covered around Horsham

What asking involves

  • Free to send. Nobody bills you for the form, and a quote commits you to nothing. You can walk away whenever you like.
  • Four short answers. You give your name, number, area and what the job is. Your email address and your street are not asked for.
  • Prices from published guides. The figures here are not made up. Each comes from a published UK cost guide. They show the kind of money involved, and a quote for your own bathroom is what counts.
  • One purpose only. Your details exist so a fitter can ring you about the bathroom, and for no other reason.

Common questions

Can a bath be replaced without redoing the tiles?

Sometimes. When the new bath matches the old one in size and the tiles are sound, they can be left alone. A bath of a different size leaves a gap or an overlap, and the bottom row of tiles at least will need doing again.

Why do bath sealants go black?

Mould grows where a damp, warm spot is not dried out. A fan that runs long enough and a squeegee after use both help. Old sealant should be cut out and replaced, as it will not clean up.

How much does a bath cost to fit?

The new bathroom cost guide gives £100 to £275 to install a standard bath, not counting the bath itself. Add more if there is a shower over it or the floor needs repair.

Ask for a bath quote in Horsham

A leaking bath does its damage out of sight. By the time a stain shows on the ceiling below, the floorboards may already be soaked. An early look from a fitter can keep the job small.

Tell us what is wrong with the bath and where in Horsham you live.

Get a free bathroom quote

Four boxes and a time. No email address asked for.

By sending this form you agree to your details being shared with a local bathroom fitter so they can contact you. See our privacy notice.

Get a free quote